HVAC and Plumbing Services in Camp Hill

Our expert plumbing technician removed the existing trap from the bathroom sink drain assembly and installed a new trap with new bushings and seals. After installation, the drain was thoroughly tested to ensure all connections were secure and the system was operating properly.

Our technician completed heat pump maintenance, including replacing the air filter, cleaning the coils, flushing the drain line, and inspecting the electrical components, ductwork, blower, and refrigerant system. Dirt and dust buildup was found on the blower motor, ductwork, and outdoor coil. We recommended cleaning the blower wheel and outdoor coil, professional duct cleaning, and an optional whole-home air purification system to improve airflow and indoor air quality. After maintenance, we tested the system and confirmed it was operating properly.

Our technician inspected the existing porch light and recommended replacing it with a recessed LED light to give the storm door more clearance. We removed the existing light and electrical box, carefully cut the soffit opening, and installed the new recessed light using the existing wiring. We also sealed the small openings around the new light to give the installation a clean, finished look. Once the work was complete, we tested the light to make sure it was working properly. The homeowner now has a new porch light that provides the needed lighting while sitting neatly in the soffit and staying out of the storm door’s way.

Handyside Plumbing, HVAC & Electrical provided maintenance service on a gas furnace to keep the system operating safely and efficiently. Our team inspected and cleaned the coils, checked the blower motor, wiring, flame rod, flame, and burners, and confirmed the system was responding properly to the thermostat call for heat. The igniter was tested, found to be weak, and replaced with a new nitride ignitor upgrade kit after powering down the system and cleaning debris from the combustion area. A full system checkout was completed, and everything is working well, though the ductwork was noted to be dusty and could benefit from cleaning.

Handyside Plumbing, HVAC & Electrical replaced the main sewer line after determining the clog and backup were caused by a broken section of the existing sewer pipe. Our team removed a section of the driveway and excavated down to access the damaged line. Once exposed, the old pipe was removed and replaced with new piping from the existing sweep to the street. A new cleanout was installed and stubbed to surface level for future access. The new line was properly bedded in stone and all required testing was performed to confirm proper operation. After the work was completed, the excavation was backfilled to above grade in the yard and the removed section of the driveway was temporarily filled with stone until weather conditions allow for the asphalt to be replaced.

Handyside Plumbing, HVAC & Electrical responded to a customer request to update their outdated bathtub area, which featured red brick they no longer preferred, by completing a full tub remodel. Our team removed the existing bathtub and surrounding materials and installed a new tub and updated surround to create a clean, modern, and more visually appealing bathroom space.

Handyside helped the family by installing a brand-new HVAC system and clearing their ductwork, improving airflow, efficiency, and overall air quality. This upgrade created a more comfortable and healthier home environment for the parents and their newborn baby.

Handyside Plumbing, HVAC & Electrical resolved the issue by completing a full sewer line replacement and repair despite the lateral being at a significant depth, which required larger equipment. We pulled the necessary permits and coordinated PA One Call, then excavated and trenched from the home to the curb to access the damaged clay line. After safely exposing the pipe, we removed the failing section, bedded the trench with stone for stability, and installed new 4" PVC piping with two new cleanouts (one at the home and one at the curb) for easier future service. We also lined the section from the curb to the street, tested the system to confirm proper operation, and coordinated the township inspection. Once approved, we backfilled and restored the area, including replacing the concrete sidewalk.

After a thorough evaluation, our team determined that the home’s existing heating and cooling system—originally installed in 2006—was no longer operating safely or efficiently due to a cracked heat exchanger. To improve comfort, efficiency, indoor air quality, and long-term reliability, we provided a complete HVAC system upgrade tailored to the homeowners’ needs.

We safely removed and disposed of the old equipment and installed a high-efficiency American Standard dual-fuel heating and cooling system, featuring a 97% efficient two-stage gas furnace and a variable-capacity air conditioner rated up to 18 SEER2. This advanced system delivers consistent temperatures, quieter operation, and reduced energy costs by adjusting output based on the home’s demand rather than constantly cycling on and off.

To address comfort issues on the second floor, we added HVAC zoning, separating the first and second floors. This allows each level of the home to be controlled independently, improving comfort during hot summer months and cold winter days.

Indoor air quality was also a priority. We installed a whole-home Aprilaire MERV 16 air filtration system to capture allergens, dust, and airborne particles, along with a fresh air ventilation system to bring in clean, filtered outdoor air for a healthier indoor environment.

The installation included custom duct transitions, upgraded filtration, new refrigerant lines, electrical and gas connections, proper drainage, and a new smart Wi-Fi thermostat—ensuring the system was installed correctly, safely, and built to last.

The homeowners now enjoy:

• Improved whole-home comfort year-round

• Better temperature control between floors

• Cleaner, healthier indoor air

• Increased energy efficiency and system reliability

• Long-term peace of mind with strong manufacturer and labor warranties

This solution delivers a modern, energy-efficient HVAC system designed to meet the home’s comfort needs today while preparing it for the future.

Due to the safety risks identified, we recommended and completed a full electrical service upgrade to ensure the home was protected and up to current electrical code standards.

During our site visit, we upgraded the home from a 100-amp electrical service to a 200-amp overhead service, significantly increasing capacity and safety. This included the complete removal of the old electrical components and installation of a brand-new breaker panel, breakers, meter socket, service line, and weather head. All grounding and bonding were updated as required to meet code, and the point of attachment on the home was relocated to a safer, compliant location.

To further protect the home, we installed whole-home surge protection, safeguarding major appliances and electronics from electrical surges and power fluctuations. A temporary breaker solution was also installed to maintain safe operation during the transition.

Additional improvements included replacing the plywood backing behind the electrical panel, reinstalling a GFCI outlet below the panel, and clearly labeling all breakers for easier identification and future servicing.

The customer also enrolled in a Handyside membership, providing ongoing maintenance benefits, priority service, and extended warranties.

At completion, all electrical systems were fully tested and confirmed to be operating safely and properly.

The homeowner now benefits from:

• A safe, code-compliant 200-amp electrical service upgrade

• Eliminated fire risk caused by an overheating electrical panel

• Protection against power surges and appliance damage

• Increased electrical capacity for modern household demands

• Long-term peace of mind with a 10-year parts and labor warranty

After evaluating the home’s plumbing system and hot water usage, we recommended a water heater replacement along with a new water softener system to improve performance, efficiency, and water quality.

Our team safely shut off the water supply, drained and removed the old water heater, and upgraded the plumbing connections. We installed a new 50-gallon Rheem power-vent water heater, along with a new expansion tank, new shutoff valves on both the hot and cold water lines, and a mixing valve to ensure safe and consistent water temperatures throughout the home. The venting was also updated by replacing a section of the existing PVC venting to meet current installation standards.

Once installed, the system was filled, powered on, and thoroughly tested. All gas and water connections were checked to confirm leak-free operation and proper performance.

To address the homeowner’s water quality concerns, we installed a Lancaster whole-home water softener, including a new brine tank and discharge line. The system was initially bypassed until startup could be completed. On a return visit, our technicians completed the softener startup process, ensuring the system was operating correctly.

During this visit, we also identified a dripping shutoff valve serving the dehumidifier. To prevent future issues, we proactively replaced it with a new angle stop valve and verified there were no leaks.

The homeowner now benefits from:

• Reliable, consistent hot water for the entire family

• Improved energy efficiency and system safety

• Softer, better-quality water throughout the home

• Updated plumbing components and peace of mind