Handyside Plumbing, HVAC & Electrical installed a new 200-amp overhead electrical service, including a new meter housing and a 40-space electrical panel. Our team also replaced the 50-amp circuit supplying the garage subpanel. Upon completion, we clearly labeled the electrical panel for the homeowner’s convenience, tested the system, and verified that all components were functioning properly.

Our team installed a whole-home backup generator to help keep the homeowner’s home running during power outages. We prepared the area, installed a proper base for the generator, and connected it to the home’s gas and electrical systems. The generator was also connected to an automatic transfer system, so it can turn on automatically when the power goes out without the homeowner having to do anything. We programmed and tested the system to make sure it was ready when needed and set it up to run regular automatic tests. The homeowner can also check the generator’s status through an app. We added cold-weather protection to help the generator work reliably during colder months. After everything was installed, our team tested the generator and backup system to make sure it was working properly. Now, the homeowner has dependable backup power and greater peace of mind knowing their home is better prepared for unexpected outages.

Our electrician inspected Jared’s home after a vehicle accident damaged a nearby utility pole and disconnected the home’s electrical service. After checking the damaged connection, we explained what was needed to safely restore power. Jared approved the repair, and our team repaired the damaged service connection and reconnected the home to the electrical supply. We secured the connection and inspected the completed work to make sure it was safe and properly installed. The electrical work then passed inspection, and we completed the required paperwork. During the visit, Jared also asked about his older water heater, so we arranged for a Handyside plumbing technician to inspect it and provide recommendations if needed. With the electrical service repaired, inspected, and ready for power, Jared can have confidence that the work was completed safely and correctly.

Handyside Plumbing, HVAC & Electrical provided service for the customer after he contacted us to replace his existing 100 amp electrical service and panel. Since this was a permitted project, our team coordinated and completed all required permit and inspection procedures before installing the new electrical panel and reconnecting the existing circuits. The completed installation provides safer, more reliable electrical distribution and brings the system up to current operating standards.

Handyside Plumbing, HVAC & Electrical provided service for the customer after they contacted us about multiple rooms not having electricity. Our team reset a tripped GFI, which restored power to the affected areas. We also brought to the customer’s attention that the breaker panel was very small and had many tandem breakers. The customer explained that there are many circumstances where the breakers trip. Our team recommended a full panel swap out along with installing two new kitchen circuits to help alleviate strain on the existing circuits and improve the overall reliability of the electrical system.

Handyside Plumbing, HVAC & Electrical provided options for the customer after they contacted us about a whole home generator. We moved forward with the project and installed a 26KW Generac whole home generator with an automatic 200 amp transfer switch. The installation required careful placement around the customer’s propane tanks, maintaining 5 feet of clearance from windows, 18 inches of rear clearance, and 36 inches of front and side clearance to allow for proper airflow and safe operation.

Handyside Plumbing, HVAC & Electrical came out to evaluate the customer’s electrical issues. After reviewing the breaker panel and outside service, it was recommended that the outside service wire and meter base be replaced. The breaker panel was in decent condition, but it needed to be rewired, and the plywood backing behind the panel also needed to be updated. After our work was completed, the home’s electricity was fully restored.

Handyside Plumbing, HVAC & Electrical provided replacement of the old smoke detectors in the home to address the customer’s request for updated safety devices. Our team removed the old smoke detectors, installed brand new smoke detectors in their place, and verified that the new units were mounted properly and operating correctly.

Handyside Plumbing, HVAC & Electrical returned to replace the existing 100 amp overhead service with a new 200 amp overhead service, including a 200 amp disconnect, 200 amp meter, and a new 200 amp breaker panel with all new breakers and surge protection. We also re labeled the breaker panel to the best of our ability at the completion of the work, so the system is now much more organized and safe.

Handyside Plumbing, HVAC & Electrical evaluated the customer’s generator and reviewed all available options with her. After discussing the condition of the existing unit and long term reliability, the customer chose to convert from oil to gas. Handyside Plumbing, HVAC & Electrical completed a replacement of the 200 amp underground electrical service and installed a new 26KW whole home generator to provide safe, efficient, and dependable backup power for the home.